We recently upgraded a few installations to more accurate Overhead IP Connected Video counters. We brought back the Walker Wireless 418 counters and CompuCounts. We have cleaned, aligned and tested the counters. They work! We refurbished the CompuCounts and installed updated firmware so they operate as DataMaster receivers. Now we can offer these refurbished units to you at a considerable savings. When new – these units sold for about $1500. Our newer versions sell for $999 plus shipping. And these refurbished units will sell for $599 plus shipping.
If you have Trafsys Walker Wireless CompuCounts – these refurbished counters (Only $199 per counter set) will work with your CompuCount. If you already have a DataMaster – these refurbished counters will work with those too. And keep in mind that a CompuCount, Count Manager, or DataMaster can handle data from up to 10 counters that are in radio frequency range.
The 418 Directional Counter (IN/OUT) counts have a radio frequency range of 100 feet. But we offer repeaters to increase this distance to about 500 feet and even through a floor.
Stand-alone people counters are great for collecting traffic counts on a “manual” basis. Whenever you want the count, you walk to the people counter, look at the display, and document the traffic. But it means a lot of walking if you want to know how busy your facility is on an hourly basis (so that you can determine staffing needs or hours of operation). And what do you do if you forget to collect the data?
If you want an automated method of counting, consider using the TotalCounter418RF and DataMaster system. The counter has a built in 418 MHz radio to wirelessly transmit count data to the DataMaster receiver attached to your PC network. Using standard web browser software, you will view the half-hour, hourly, daily, weekly, monthly and yearly people count data at your PC. CSV file exports are provided.
Some of the Main Features of the TotalCounter418RF include:
– IN and OUT count data.
– Measures across a 25 foot span
– No reflector – no misalignment issues – easy to install
– Battery Type: 3.6 Volt, AA Lithium. 7 required. User replaceable.
– Silent Operation
– Mounting bracket included for ease of installation
– Sensor Dimensions: 5.75 inches long x 2.0 tall inches x 1.25 inch deep. The long edge of the counter must be installed parallel to the floor.
– Typical Operating Environment: 0 to 120 degrees F. Protected from weather.
– Typical Battery Life: 1 year
The TotalCounterRF is an infrared beam-break people counter. The infrared transmitter side sends a safe and invisible infrared beam to the infrared receiver. When someone, or something, passes through this invisible beam, they “break” the beam and are counted.
The physics of a beam break people counter means that if two people walk through side-by-side, they will be counted as one. And if a group of people walk through at the same time, it is unlikely that all of them will be counted. ALL infrared beam-break and ALL infrared-reflected people counters work in the same way. On a single door entrance (typically 36″ wide), most people enter one at a time, so the counting accuracy is typical very high (93 to 95%). But on a double-door entrance – this typical accuracy can drop to 80 to 85%.
To add additional counters, or a repeater, contact Sales@WeCountPeople.com