The AccuraCounter was first designed way back in 1986 and of course has been updated many times over the years. We use new and improved components when they become available, and add features that are of benefit to our customers. But one thing that has not changed is our ability to deliver a low cost, high reliability people counters.

With a stand-alone people counter, you walk to the counter at the door to read the on-board display. You write down the number and reset the display.

The AccuraCounter is an infrared reflected beam-break people counter. The sensor sends a safe and invisible infrared beam to the reflector installed opposite the sensor. When someone, or something, passes through this invisible beam, they “break” the beam and are counted. These people counters are known as “non-directional” people counters because they do not separate the IN and OUT counts. So if someone walks in, then walks out, they will be counted twice, and you will need to divide the number on the display by 2 to arrive at a visitor count. Or you can program the AccuraCounter to automatically divide by 2.

The physics of a beam break people counter means that if two people walk through side-by-side, they will be counted as one. And if a group of people walk through at the same time, it is unlikely that all of them will be counted. ALL infrared beam-interrupt people counters work in the same way. On a single door entrance (typically 36″ wide), most people enter one at a time, so the counting accuracy is typical very high (93 to 95%). But on a double-door entrance – this typical accuracy can drop to 80 to 85%.

Art Galleries and Museums

Government Centers

Public Libraries and Learning Centers

Recreation Centers

Retail Stores

Student Centers

Visitor and Welcome Centers

The AccuraCounter was first designed way back in 1986 and of course has been updated many times over the years. We use new and improved components when they become available, and add features that are of benefit to our customers. But one thing that has not changed is our ability to deliver a low cost, high reliability people counters.

With a stand-alone people counter, you walk to the counter at the door to read the on-board display. You write down the number and reset the display.

The AccuraCounter is an infrared reflected beam-break people counter. The sensor sends a safe and invisible infrared beam to the reflector installed opposite the sensor. When someone, or something, passes through this invisible beam, they “break” the beam and are counted. These people counters are known as “non-directional” people counters because they do not separate the IN and OUT counts. So if someone walks in, then walks out, they will be counted twice, and you will need to divide the number on the display by 2 to arrive at a visitor count. Or you can program the AccuraCounter to automatically divide by 2.

The physics of a beam break people counter means that if two people walk through side-by-side, they will be counted as one. And if a group of people walk through at the same time, it is unlikely that all of them will be counted. ALL infrared beam-interrupt people counters work in the same way. On a single door entrance (typically 36″ wide), most people enter one at a time, so the counting accuracy is typical very high (93 to 95%). But on a double-door entrance – this typical accuracy can drop to 80 to 85%.

Art Galleries and Museums

Government Centers

Public Libraries and Learning Centers

Recreation Centers

Retail Stores

Student Centers

Visitor and Welcome Centers