AccuraCounterMINI – AC Powered Standalone Counter with 7 Foot measuring span and Small Sensor


The AccuraCounterMINI is an ac-powered stand-alone people counter, where you read the total count from the display, write down the number, and reset the display.
These are infrared reflected beam-break people counters.  The sensor sends a safe and invisible infrared beam to the reflector installed opposite the sensor.  When someone, or something, passes through this invisible beam, they “break” the beam and are counted.  These people counters are known as “non-directional” people counters because they do not separate the IN and OUT counts.   So if someone walks in, then walks out, they will be counted twice.and you will need to divide the number on the display by 2 to arrive at a visitor count.  
 The physics of a beam break people counter means that if two people walk through side-by-side, they will be counted as one.  And if a group of people walk through at the same time, it is unlikely that all of them will be counted.   ALL infrared beam-break and ALL infrared-reflected people counters work in the same way.  On a single door entrance (typically 36″ wide), most people enter one at a time, so the counting accuracy is typical very high (93 to 95%). But on a double-door entrance – this typical accuracy can drop to 80 to 85%.
 Some of the advantages of this counter include:
  • This is one of the least expensive people counters that we offer.
  • The AccuraCounterMINI is not a kit that you have to assembly or wire.  Just plug in the ac-power cord, align the sensor to the reflector, and you are ready to go.  
  • On board alignment lights make the sensor easy to install, easy to align, easy to use and easy to maintain.
  • All electronics are sealed to protect them from accidental damage.  You won’t risk damaging any components or misaligning sensors when trying to replace hard to remove batteries.
  • The AccuraCounterMINI includes battery-backup to save its count total even if AC power is lost.   (The unit will not count without AC power.)
  • The AccuraCounterMINI is ac-powered and will never need batteries.
  • The AccuraCounterMINI can count across a 7 foot span between the sensor and the reflector.   This would cover a set of double doors if the sensor and reflector are installed on the door frame side.
  • The AccuraCounterMINI comes with a one-year warranty.

5 in stock

The operation of the AccuraCounterMINI people-counter is very simple. An Infrared Beam is sent from the transmitter and reflected back to the receiver.  When someone walks through the beam, the beam is interupted, and a count is registered. The maximum distance between the infrared beam break people counter sensor and the reflector is seven (7) feet.

The AccuraCounterMINI People Counter counts people as they enter and leave. At the end of the day you divide the total on the counter by 2 to obtain your visitor count.

The AccuraCounterMINI is the result of 15 years of experience in designing, manufacturing and supplying People Counters.  This AC-Powered People Counter never needs batteries and there are no Annual Maintenance Fees!

The ac power cord is 4 foot long.  The cord between the sensor and the display is 5 feet long.

The sensor is very small and measures 1.25 inches tall x 0.5 inches wide x 0.75 inches deep.

The display case measures 5.25 inches tall x 3.25 inches wide x 2 inches deep.   There is a 6 digit display with numbers that are 0.5 inches tall.

We recommend use of a surge protector to protect the AccuraCounterMINI from power fluctuations.

For more information, please visit 

Weight 1 lbs
Dimensions 9 × 6 × 3 in