TotalCounter Wireless Counter with Hourly Data Collection

Description

If you are looking for a battery-operated counting solution, with hourly counts wirelessly sent back to your network – without using your w-fi network – we have the system for you!

Because of the variability of the solution, we recommend that you contact us to discuss the specific installation requirements of your location.

People counting solutions are available for single door entrances and multiple entrances in your facility.

Please send an EMAIL including contact information, and the following information to sales@wecountpeople.com.     Photos of each entrance, showing the floor/entrance/ceiling in one shot would be very helpful.

• How many buildings to be counted
• How many entrances to be counted
• How wide is each entrance – is it a single door swinging out, a single sliding door, double sliding door, no door, etc
• Are all of the entrances on the same floor – or on multiple floors
• What is the approximate distance from each entrance to the Data Collector which would be connected to ac-power and your network
• Do you want unidirectional counts (divide total by 2) or bidirectional (IN/OUT) counts

Product Description

Stand-alone people counters are great for collecting traffic counts on a “manual” basis. Whenever you want the count, you walk to the people counter, look at the display, and document the traffic. But it means a lot of walking if you want to know how busy your facility is on an hourly basis (so that you can determine staffing needs or hours of operation). And what do you do if you forget to collect the data?

If you want an automated method of counting, consider using the TotalCounter Wireless solution. The TotalCounterFF Wireless counter has a built-in radio to wirelessly transmit count data to the Wireless Receiver attached to your PC network using a standard Ethernet cable. Using our supplied software, you will view hourly, daily, monthly people count data at your PC.   CSV file exports are provided.

Some of the Main Features of the TotalCounter Wireless solution include:

– Front Firing sensor configurations.
– Measures across an entrance span up to 29 feet wide.
– No reflector – no misalignment issues – easy to install
– Easy alignment
– Battery Type: 1.5 Volt, AA Lithium. 2 per side.  User replaceable.
– Silent Operation
– Mounting tape and L-brackets included for ease of installation.
– Sensor Dimensions:   2.5 inches  x 2.5 inches x 1inch deep
– Typical Operating Environment: 0 to 120 degrees F. Protected from weather.
– Typical Battery Life:  Up to 2 years depending on traffic volume

The TotalCounterFF is an infrared beam-break people counter. The infrared transmitter side sends a safe and invisible infrared beam to the infrared receiver.  When someone, or something, passes through this invisible beam, they “break” the beam and are counted.

The physics of a beam break people counter means that if two people walk through side-by-side, they will be counted as one.  And if a group of people walk through at the same time, it is unlikely that all of them will be counted.   ALL infrared beam-break and ALL infrared-reflected people counters work in the same way.  On a single door entrance (typically 36″ wide), most people enter one at a time, so the counting accuracy is typical very high (93 to 95%). But on a double-door entrance – this typical accuracy can drop to 80 to 85%.

Any questions, contact Sales@WeCountPeople.com